User manual

35
8.6 Network configuration
8.6.1 Basic network settings
The user can also enter the Basic Network Settings to set the IP address except using the
search software “IPCameraSearch”. Default setting here is DHCP. See figure 8-17 below.
Figure 8-17
Remark: The router connected to camera need to enable DHCP when the user uses
“obtain IP from DHCP server”; the routers enable DHCP by default.
8.6.2 Wireless Lan settings
Please refer to chapter 8.2. First scan your environment. Then choose your Wireless
network. Check the box, select network type, select the authentication of your router and
insert the password of the router. Press Set up to save the settings.
Figure 8-18