User manual

Product Overview
Outdoor Camera (installation in peephole)
1 doorbell button of the outdoor camera: Press this button to call. (BLUE LED:
shall be on when ring the bell)
Emitter
1
USB charging Port
4
Connector
2
Start
5
LED
(see following picture)
3
Monitoring mode
Non-monitoring mode (Power saving mode)
6
Code match key
(see following picture)
3 keys of the Emitter:
1. ON/OFF (Power saving or non-saving power)
Mode select key: ON: Monitor mode (Can monitor outside from handset). OFF: Non-
monitor mode (Power saving mode, cannot monitor from handset by pressing “OK”
button. After choosing mode, please start up the emitter to confirm.
1
Camera
3
Back side adhesive tape
2
Doorbell button
4
Connection Cable