User manual
31
Settings Device manage:
Add
By checking the box in front of one or more devices from the device list
and then pressing Add the selected devices will be add to a Area.
Quick setup
All devices in the device list will be added
Add area
Add areas for organizing the cameras.
Add device
Add a device manually by filling in all needed information.
Modify device
Edit the device settings.
Clear devices
All devices are deleted from the area.
Flush
Refresh device list.
Assign IP
Edit IP address.
Settings Device settings:
Device
information
By clicking on a device from the device list you get several
information’s about the device. Note: Information of the device is only
available from added devices. Click on the device from the list.
General setting
Set date format, HDD overwrite or dwell interval for full screen or
screen divided.
Network setting
Set DHCP on/ off, set the port, see P2P ID and set PPPoE on or off.
Encoding setting
Set main and sub stream settings like encode mode, encoding format,
quality, bit and frame rate.
Record settings
Set the record plan for every channel, select Timing, Motion or/and
Sensor (see chapter 5.3 record setup record plan).
Screen settings
Set the channel name of the channel.
PTZ settings
Set different options for the PTZ.
Video detection
settings
Set the sensitivity, duration, alarm and buzzer for motion detect and
video loss (see chapter 5.3 channel setup video detection).
Alarm settings
Set alarm, buzzer, work mode and alarm duration.
Channel mode
setting
Set the amount of analogue and digital channel the NVR should
support.
Settings Local settings:
General settings
Set language, import or export setting information, automatically
synchronize time and connect devices on start up.
Record settings
Set the record plan for every channel, select Timing or/and motion (see
chapter 5.3 record setup record plan).
Storage settings
Set the local disk letter, HDD overwrite and HDD reserved.