User manual

59
11.4.1.1 P2P configuration
11.4.1.2 Quick DDNS configuration
Select the P2P connecion from Add Device (Figure
11-5 above).
1. Press on the button and scan the QR-Code of
the device.
2. Name the device connection.
3. Username and Password are default
(admin/admin).
4. Select in Live Preview between Main and Extra
stream.
Default: Extra stream
Note: Under poor network environment we suggest to
set to Extra stream.
5. Press to save:
To configure the Quick DDNS take the domain name
from web interface of the device under Setup->
Network-> DDNS/ Domain Name. Each device has a
default domain name (Generated by MAC address).
You can also use customized valid domain name (has
not registered).
Before you use Quick DDNS, you need to enable the
service.
After successful registration, you can use domain name
to login installed of the device IP.
Note:
 User name is optional.
 System may take back the domain name that is
idle for one year. You can get a notification email
before the cancel operation if your email address
setup is OK.