User manual

30
6.6 Setup
6.6.1 Camera
6.6.1.1 Conditions
A: Conditions
B: Profile management:
It works with the profiles select for normal, day and night under 6.6.1.1.1 conditions. The
default setting here is full time/day. But also choose normal or schedule. If the setting full
time is activated choose between the configuration of day or night. The here selected
profile type is always enabled. When schedule is activated select how long the day and the
night profile are working.
You can select the following profile
types: normal, day or night.
After you selected the mode, you
can set brightness, contrast,
saturation, sharpness, anti-flicker,
day & night, d &n sensitivity, d & n
Delay, BLC mode, mirror, flip, 3D
NR and 3D NR level for each
profile.
After you changed the setup or only
one parameter you have to click on
save, to apply the changes
constantly.
By clicking on default the changes
you made are deleted and the
parameters are back on default
settings.
Only TX-65 & TX-66
White balance (WB) function:
Auto, Natura, Street Lamp, Outdoor,
Manual
IR-light function:
- Manual, SmartIR, OFF