User manual

6.4 PTZ (Only TX-67)

Change the direction of the Camera with pressing the button shown

at the left side. The speed of the camera can be set between 1-8.

Under PTZ the camera can be Zoom In or Zoom Out!

PTZ Settings: there are 2 options to set (Preset & Tour).

Preset & Tour: Click on the dropdown menu to select between the

Preset & Tour. You have an option to set between 1 to 25 Preset or

Tour.

1. Fast positioning button: Use your mouse to select a zone

in the monitor window, PTZ can fast rotate and focus to current

position.

2. Speed operation: The larger the value is, the faster the speed

is. This is for PTZ direction control, zoom, focus and aperture.

3. PTZ seting (Go to Setup PTZ Function): Call the preset

configuration for scan, pattern, tour, preset.

(Preset: Use direction keys to move the camera to your desired

location and then input preset value. Click "Add" button, you

have set one preset. Repeat this step to add more preset

positions.

Tour: Input tour value and then click the "Add" button, you have

set one tour. Then input preset value in the column. Click "Add

Preset" button, you have added one preset in the tour. Or you

can click "Del Preset" button to remove one preset from the

tour.)

Note: Repeat the above procedures you can add or delete

more presets in one tour.