User manual

23
Input your
IP address
here
6. WEB Operation
This series network camera products support the Web access and management via PC.
Web includes several modules: Monitor channel preview, system configuration, alarm, etc.
6.1 Network Connection
Follow the steps listed below for network connection.
 Make sure the network camera has connected to the network properly.
 Find the IP address of the camera using the My Secure Pro PC Client or your router.
6.2 Login and Main Interface
Open IE/ Mozilla (Chrome/Safari optional) and input network camera address in the
address bar. See Figure 6- 1.
Figure 6- 1
Figure 6- 2
The login interface is shown on Figure 6-
2.
Input your user name and password.
Default factory name is admin and
password is admin.
Note: For security reasons, modify
your password after you first login.