User manual

22
Note: You will initially not see any cameras in the list, as shown in Figure 5-2.
Press the Search button at the top left to display devices that are not added on
your network. The pop-up window is shown in Figure 5-3.
Figure 5-3
Now select the cameras that you want to be added by checking the box in front of the IP
address and clicking on the add button or by double-clicking on the IP.
When the status of the camera is displayed as offline after adding the camera,
click on the pencil in Figure 5-2 to change the user and password. The window shown
in Figure 5-4 opens.
Figure 5-4
After clicking Save, the camera is added to your device list. If you now want to adapt
configurations, we recommend you to switch to the WEB interface chapter 6 WEB operation.