User manual

97
reneges from 0 to 100.
Day/Night
It is to set device color and the B/W mode switch. The default setup is
auto.
 Color: Device outputs the color video.
 Auto: Device auto select to output the color or the B/W video
according to the device feature (The general bright of the video or
there is IR light or not.)
 B/W: The device outputs the black and white video.
 Sensor: It is to set when there is peripheral connected IR light.
5.8.1.3 Encode
5.8.1.3.1 Encode
The encode interface is shown as below. See Figure 5-16.
Figure 5-16
Refer to the following sheet for detailed information.
Parameter
Function
Channel
Select a channel from the dropdown list.
Video enable
Check the box here to enable extra stream video. This item is
enabled by default.
Code stream type
It includes main stream, motion stream and alarm stream. You
can select different encode frame rates form different recorded
events.
System supports active control frame function (ACF). It allows
you to record in different frame rates.
For example, you can use high frame rate to record important
events, record scheduled event in lower frame rate and it
allows you to set different frame rates for motion detection
record and alarm record.
Compression
The main bit stream supports H.264 with 1080P as max.
resolution. The extra stream supports H.264, MJPEG with D1