User manual

96
Sharpness
It is to adjust sharpness. The default value is 50.
The larger the number is, the sharper the video is. When you input the
value here, the bright section and the dark section of the video will be
adjusted accordingly. You can use this function when the whole video is
too dark or too bright. Note the video may become hazy if the value is too
high. The value ranges from 0 to 100.The recommended value ranges
from 40 to 60.
White level
(optional)
It is to enhance video effect.
Color
mode
(optional)
It includes several modes such as standard, color. You can select
corresponding color mode here, you can see hue, brightness, and contrast
and etc will adjust accordingly.
Auto Iris
(optional)
It is to enable/disable auto iris function.
Flip
It is to switch video up and bottom limit.
This function is disabled by default.
Mirror
It is to switch video left and right limit.
This function is disabled by default.
BLC Mode
(optional)
BLC
The device auto exposures according to the environments
situation so that the darkest area of the video is cleared
WDR
For the WDR scene, this function can lower the high bright section
and enhance the brightness of the low bright section. So that you
can view these two sections clearly at the same time.
The value ranges from 1 to 100. When you switch the camera
from no-WDR mode to the WDR mode, system may lose several
seconds record video.
HLC
After you enabled HLC function, the device can lower the
brightness of the brightest section according to the HLC control
level. It can reduce the area of the halo and lower the brightness
of the whole video.
Off
It is to disable the BLC function. Note this function is disabled by
default.
Profile
(optional)
It is to set the white balance mode. It has effect on the general hue of the
video. This function is on by default.
You can select the different scene mode such as auto, sunny, cloudy,
home, office, night, disable and etc to adjust the video to the best quality.
 Auto: The auto white balance is on. System can auto compensate the
color temperature to make sure the vide color is proper.
 Sunny: The threshold of the white balance is in the sunny mode.
 Night: The threshold of the white balance is in the night mode.
 Customized: You can set the gain of the red/blue channel. The value