User manual

93
reference. M stands for main stream. S stands for sub stream (extra stream).
4) If you login via the WAN mode, system does not support alarm activation to open the
video function in the Alarm setup interface.
Important
 For multiple-channel monitor mode, system adopts extra stream to monitor by default.
You can not modify manually. All channels are trying to synchronize. Note the
synchronization effect still depends on your network environments.
 For bandwidth consideration, system can not support monitor and playback at the same
time. System auto closes monitor or playback interface when you are searching setup in
the configuration interface. It is to enhance search speed.
5.8 Setup
5.8.1 Camera
5.8.1.1 Remote Device
Remote device interface is shown as below. See Figure 5-13.
Figure 5-13
Figure 5-14