User manual

92
5.7 WAN Login
In WAN mode, after you logged in, the interface is shown as below. See Figure 5-11.
Figure 5-11
Refer to the following contents for LAN and WAN login difference.
1) In the WAN mode, system opens the main stream of the first channel to monitor by default.
The open/close button on the left pane is null.
2) You can select different channels and different monitor modes at the bottom of the
interface. See Figure 5-12.
Figure 5-12
Important
The window display mode and the channel number are by default. For example, for
the 4-channel, the max window split mode is 4.
3) Multiple-channel monitor, system adopts extra stream to monitor by default. Double click
one channel, system switches to single channel and system uses main stream to monitor.
You can view there are two icons at the left top corner of the channel number for you