User manual

If it is your first time to log in, the system pops up a warning information to ask you whether

you like to install the web plug-in or not. Install the web plug-in.

After you logged in, you can see the main window. See picture below.

Web monitoring window

Note:

 This quick start guide is for reference only. Slight difference may be found in user

interface.

 All the designs and software here are subject to change without prior written notice.

 All trademarks and registered trademarks mentioned are the properties of their

respective owners.

 If there is any uncertainty or controversy, refer to the final explanation of us.

 Visit our website or contact your local service engineer for more information.

5.2 LAN Mode

For the LAN mode, after you logged in, you can see the main window. See Figure 5-5.

This main window can be divided into the following sections.

 Section 1: There are six function buttons: Live (chapter 0), Setup (chapter 5.8), Info

(Chapter 5.9), playback chapter(5.10), alarm (chapter 5.11), and logout (chapter 5.12).

 Section 2: There are monitor channels successfully connected to the TX-64.

Refer to Figure 5-1 below for main stream and extra stream switch information.