User manual

86
5 Web Operation
5.1 General Introduction
The TX-64 supports access via Browser after installing a web plugin. The Web function
provides the following settings: Channel monitor menu tree, search/playback, alarm setup,
system setup, PTZ control and monitor window and etc.
5.1.1 Network Connection
Before log in, make sure:
 Network connection is right
 TX-64 and PC network setup is right. Refer to network setup (main menu-> setting->
network)
 System can automatically download latest web control and the new version can
overwrite the previous one.
5.1.2 Log in
Open IE/ Mozilla/ Chrome/ Safari and then input the TX-64 IP address in the address column.
For example, if your TX-64 IP address is 192.168.1.108, then input http:// 192.168.1.108 in
IE address column. See Figure below.
Input your IP
address
here
The login interface is shown on
the right.
Please input your user name
and password.
Default factory name is admin
and password is admin.
Note: For security reasons,
please modify your password
after you first login.