User manual

83
4.14.3.1.1 Add/Modify Group
Click add group button, the interface is shown as below. See Figure 4-122. Here you can
input group name and then input some memo information if necessary. There are many
rights such as control panel, shut down, real-time monitor, playback, record, record file
backup, PTZ, user account, system information view, system setup, log view, clear log,
upgrade system, control device and etc.
The modify group interface is similar to the Figure 4-122.
Figure 4-122
Tip:
In modify interface, check the modify password box and then input old password and new
password. Input new password again to confirm the modification. The password max has
6-byte and the space in the front or at the end of the string is null. The space is valid only in
the middle of the string. For the account of the Account function, it can change the password
of other users too.
4.14.3.1.2 Add/Modify User
Click add user button. Input the user name, password; select the group it belongs to from the
dropdown list. Then you can check the corresponding rights for current user. For convenient
user management, usually we recommend the general user right is lower than the admin
account. The modify user interface is similar to Figure 4-123.
Figure 4-123