User manual

76
4.12.3 HDD Detect
Note: This function is for some series product only.
The HDD detect function is to detect HDD current status so that you can clearly understand
the HDD performance and replace the malfunction HDD.
There are two detect types:
 Quick detect is to detect via the universal system files. System can quickly complete
the HDD scan. If you want to use this function, make sure the HDD is in use now. If
the HDD is removed from other device, make sure the write-data once was full after
it installed on current device.
 Global detect adopts Windows mode to scan. It may take a long time and may affect
the HDD that is recording.
4.12.3.1 Manual Detect
From main menu->Setting->Storage->HDD Detect->Manual Detect, the interface is shown
as below. See Figure 4-106.
Select detect type and HDD. Click start detect to begin. You can view the corresponding
detect information.
Figure 4-106
4.12.3.2 Detect Report
After the detect operation, you can go to the detect report to view corresponding information.
From main menu->Setting->Storage->HDD Detect->Manual Detect, the interface is shown
as below. See Figure 4-107.
Figure 4-107