User manual

71
added IP address.
e) System only checks start address if you add IP address. System check start address
and end address if you add IP section and the end address shall be larger than the
start address.
f) System may check newly added IP address exists or not. System does not add if
input IP address does not exist.
 Delete: Click it to remove specified item.
 Edit: Click it to edit start address and end address. See Figure 4-98. System can check
the IP address validity after the edit operation and implement IPv6 optimization.
 Default: Click it to restore default setup. In this case, the trusted sites and blocked sites
are both null.
Note:
 If you enabled trusted sites, only the IP in the trusted sites list can access the device.
 If you enabled blocked sites, the IP in the blocked sites can not access the device.
 System supports add MAC address.
Figure 4-97
Figure 4-98
4.11.1.7 Email
The email interface is shown as below. See Figure 4-99.
 SMTP server: Input your email SMTP server IP here.
 Port: Input corresponding port value here.
 User name: Input the user name to login the sender email box.
 Password: Input the corresponding password here.
 Sender: Input sender email box here.
 Title: Input email subject here. System support English character and Arabic number.
Max 32-digit.