User manual

Figure 4-60

4.7.5 Manual Record/Snapshot

You need to have proper rights to implement the following operations. Make sure the

HDD has been properly installed.

4.7.5.1 Manual Record

a) Right click mouse and select manual record or in the main menu, from

Setting->Storage->Manual Record. Manual record menu is shown as in Figure 4-61.

Tip: You can click Rec button on the front panel (if possible) to go to the Manual Record

interface.

Figure 4-61

b) Check the box here to select manual record channel(s). You can see the

corresponding indicator light on the front panel is on.

 Channel: It is to display device all channels.

 Manual: It has the highest priority. Enable corresponding channel to record no matter

what period applied in the record setup. Now system is record general file.

 Auto: System enables auto record function as you set in chapter 4.7.2 schedule

interface (General/Motion detect/Alarm)

 Stop: Stop current channel record/Snapshot no matter what period applied in the record

setup.