User manual

43
offline alarm.
 Local input alarm: The alarm signal system detects from the alarm input port.
 Network input alarm: It is the alarm signal from the network.
 IP-CAM external alarm: It is the on-off alarm signal from the front-end device and can
activate the local TX-64.
 IP-CAM offline alarm: Once you select this item, system can generate an alarm when
the front-end IP-CAM disconnects with the local TX-64. The alarm can activate record,
PTZ, snapshot and etc. The alarm can last until the IP-CAM and the TX-64
connection resumes.
 Enable: You need to highlight this button to enable current function.
 Type: normal open or normal close.
c) Click Save button to complete alarm setup interface.
Figure 4-59
d) From Main menu->Setting->Storage->Schedule, you can go to Figure 4-54.
e) Select alarm channel, period and the record type shall be alarm.
f) Click Copy button to copy current setup to other channel(s).
g) Click OK button to save alarm record information.
4.7.4.2 Alarm Snapshot
a) Refer to chapter 4.7 to enable timing snapshot.
b) From Main menu->Setting->Storage->schedule, you can go to Figure 4-54 to enable
snapshot function.
c) From Main menu->Setting->Event->Alarm, you can go to Figure 4-60 to set alarm
parameter and enable snapshot function.
d) Click Save button to save alarm snapshot setup.