User manual

42
Figure 4-57
4.7.3.2 Motion Detect Snapshot
a) From Main menu->Setting->Camera->Encode->Snapshot, you can go to snapshot
interface. See Figure 4-58.
b) In Figure 4-60, select trigger snapshot from the dropdown list and then set picture
size, quality and snapshot frequency. Click OK button to save current setup.
c) From Main menu->Setting->Event->Detect, here you can select motion detect type,
motion detect channel and then check the enable box.
d) Click OK button to complete motion detect setup.
Figure 4-58
4.7.4 Alarm Record/Snapshot
4.7.4.1 Alarm Record
a) Optional: (Alarm setup information, to connect alarm input and alarm output cable
(such as light, siren and etc)).
b) The record priority is: Alarm>Motion detect>Regular.
In the main menu, from Setting->Event-> Alarm, you can see alarm setup interface. See
Figure 4-59.
 Alarm in: Here is for you to select channel number.
 Event type: There are four types. Local input/network input/IP-CAM external/IP-CAM