User manual

41
mouse button on the start point of the area you want to select and drag the mouse to
select the area.
In the test area the best setting for sensitivity and threshold is 60 and 10 respectively.
Depending on your given environment this settings can be vary. Sensitivity and
threshold can be set in the range from 0 to 100. The higher the sensitivity and the
lower the threshold are set the more motion is detected. For example: When a leaf
falls or a cat is running in the selected area a motion will be detected.
In this case a subjective setting by the customer is requested!
After you completed the setup remember to click the save button to save current
setup. If you click the right button of the mouse to exit the region setup interface
system will not save your zone setup.
c) Period: Click set button, you can see an interface is shown as in Figure 4-57. Here
you can set motion detect period. System only enables motion detect operation in
the specified periods. It is not for video loss or the tampering. There are two ways for
you to set periods. Note system only supports 6 periods in one day. See Figure 4-57.
 In Figure 4-56, Select icon of several dates, all checked items can be edited
together. Now the icon is shown as . Click to delete a record type from one
period.
 In Figure 4-56. Click button after one date or a holiday. There are four record types:
regular, motion detection (MD), Alarm, MD & alarm.
d) Set sensitivity. Note the sixth level has the highest sensitivity.
e) Click Save button to complete motion detect setup.
f) From Main menu->Setting->Storage->-Schedule. See Figure 4-56
g) Set motion detect record channel, period and the record type shall be motion detect
(MD).
h) Click Copy button to copy current setup to other channel(s).
i) Click OK button to complete motion detect record setup.
Figure 4-56