User manual

39
Note, if you select ALL in Figure 4-51, the record setup of all channels are the same and the
Copy button becomes hidden.
Figure 4-51
Click OK button to save current setup.
4.7.2.2 Schedule Snapshot
From Main menu->Setting->Storage->Record or on the preview interface, right click mouse
and then select record item, you can see Figure 4-52.
Select snapshot channel and enable snapshot function. Click save button.
Figure 4-52
From Main menu->Setting->Camera->Encode->Snapshot, you can go to snapshot interface.
See Figure 4-53.
Select the snapshot channel from the dropdown list and then select snapshot mode as
Timing (Schedule) from the dropdown list and then set picture size, quality and snapshot
frequency.
Figure 4-53