User manual

38
Check the box to select the corresponding function. After completing all the setups
click save button, system goes back to the previous menu. There are color bars for your
reference. Green color stands for regular recording, yellow color stands for motion
detection and red color stands for alarm recording. The white means the MD and alarm
record is valid. Once you have set to record when the MD and alarm occurs, system will
not record neither motion detect occurs nor the alarm occurs.
Figure 4-49
Figure 4-50
Quick Setup
Copy function allows you to copy one channel setup to another. After setting in channel 1,
click Copy button, you can go to interface Figure 4-51. You can see current channel name is
grey such as channel 1. Now you can select the channel you wan to paste such as channel
3/4. If you wan to save current setup of channel 1 to all channels, you can click the first box
―ALL‖. Click the OK button to save current copy setup. Click the OK button in the Encode
interface, the copy function succeeded.