User manual

4.7.1.3 Snapshot

Here you can set snapshot mode, picture size, quality and frequency. See Figure 4-44.

 Snapshot mode: There are two modes: regular and trigger. If you set regular mode,

you need to set snapshot frequency. If you set trigger snapshot, you need to set

snapshot activation operation.

 Image size: Here you can set snapshot picture size.

 Image quality: Here you can set snapshot quality. The value ranges from 1 to 6.

 Interval: It is for you to set timing (schedule) snapshot interval.

Figure 4-44

Figure 4-45

4.7.2 Schedule

The record type priority is: Alarm>Motion detect>Regular.

4.7.2.1 Schedule Record

Set record time, record plan and etc. Note system is in 24-hour record by default after its

first boot up.

In the main menu, from Main menu->Setting->Storage->Schedule, you can go to

schedule menu. See Figure 4-50. There are total six periods.

 Channel: Select the channel number first. You can select ―all‖ if you want to set for the

whole channels.

 : Sync connection icon. Select icon of several dates, all checked items can be

edited or together. Now the icon is shown as .

 : Click it to delete a record type from one period.

 Record Type: Check the box to select corresponding record type. There are four types:

Regular/MD (motion detect)/Alarm/MD&Alarm.