User manual

32
Preset Setup
In Figure 4-36, click preset button and use eight direction arrows to adjust camera to the
proper position. The interface is shown as in Figure 4-37. Click Set button and then input
preset number. Click Set button to save current preset.
Figure 4-37
Tour Setup
In Figure 4-36, click tour button. Input tour value and preset No. Click Add preset button to
add current preset to the tour. See Figure 4-38.
Tip:: Repeat the above steps to add more presets to the tour. Click Del preset button to
remove it from the tour. Note some protocols do not support delete preset function.
Figure 4-38
Pattern Setup
In Figure 4-36, click Pattern button and input pattern number. Click Begin button to start
direction operation. Or you can go back to Figure 4-39 to operate zoom/focus/iris/direction
operation.
Figure 4-39