User manual

23
 Auto: The auto white balance is on. System can auto compensate the color temperature
to make sure the vide color is proper.
 Sunny: The threshold of the white balance is in the sunny mode.
 Night: The threshold of the white balance is in the night mode.
 Customized: You can set the gain of the red/blue channel. The value reneges from 0 to
100.
 Day/night. It is to set device color and the B/W mode switch. The default setup is auto.
 Color: Device outputs the color video.
 Auto: Device auto select to output the color or the B/W video according to the device
feature (The general bright of the video or there is IR light or not.)
 B/W: The device outputs the black and white video.
 Sensor: It is to set when there is peripheral connected IR light.
Figure 4-22
4.4.4 Channel Name
From main menu->Setting->Remote-Modify, here you can modify the Channel name, you
can see an interface shown as in Figure 4-23. It is to modify channel name. It max supports
31-character. Note you can only modify the channel name of the connected network camera.
Figure 4-23