User manual

21
4.4 Remote Device
4.4.1 Remote Device Connection
Figure 4-12
Figure 4-20
4.4.2 Short-Cut Menu
In the preview interface, for the channel of no IP-CAM connection, you can click the icon ―+‖
in the centre of the interface to quickly go to the Remote Device interface. See Figure 4-21.
Figure 4-21
From Main menu-> Setting->
Remote device or right click
mouse on the preview
interface and then select
remote device item, you can
see the following interface.
See
Figure 4-12.
Click Device search button, you can
view the searched IP addresses at the
top pane of the interface. Double click an
IP address or check one IP address and
then click Add button, you can add
current device to the bottom pane of the
interface. System supports batch add
function.
Click Manual Add button, you can add a
device directly. Here you can set
TCP/UPD/auto connection mode. The
default setup is TCP. See Figure 4-20.
F
i
g
u
r
e
4
-
1
3
F
i
g
u
r
e