User manual

135
7 FAQ
Questions
Solutions
TX-64 can not boot up
properly.
 Input power is not correct.
 Power connection is not correct.
 Power switch button is damaged.
 Program upgrade is wrong.
 HDD malfunction or something wrong with HDD ribbon.
 Seagate DB35.1, DB35.2，SV35 or Maxtor 17-g has
compatibility problem. Upgrade to the latest version to
solve this problem.
 Front panel error.
 Main board is damaged.
TX-64 often
automatically shuts
down or stops
running.
 Input voltage is not stable or it is too low.
 HDD malfunction or something wrong wit the ribbon.
 Button power is not enough.
 Front video signal is not stable.
 Working environment is too harsh, too much dust.
 Hardware malfunction.
System can not detect
hard disk.
 HDD is broken.
 HDD ribbon is damaged.
 HDD cable connection is loose.
 Main board SATA port is broken.
There is no video
output whether it is
one-channel,
multiple-channel or
all-channel output.
 Program is not compatible. Upgrade to the latest version.
 Brightness is 0. Restore factory default setup.
 Check your screen saver.
 TX-64 hardware malfunctions.
I can not search local
records.
 HDD ribbon is damaged.
 HDD is broken.
 Upgraded program is not compatible.
 The recorded file has been overwritten.
 Record function has been disabled.
Video is distorted
when searching local
records.
 Video quality setup is too low.
 Program read error, bit data is too small. There is mosaic
in the full screen. Restart the TX-64 to solve this problem.
 HDD data ribbon error.
 HDD malfunction.
 TX-64 hardware malfunctions.
Time display is not
correct.
 Setup is not correct
 Battery contact is not correct or voltage is too low.
 Crystal is broken.