User manual

133
Refer to the following sheet for detailed information.
Type
Parameter
Function
Alarm Type
Video loss
System alarms when video loss occurs.
Motion detection
System alarms when motion detection alarm occurs.
Tampering
System alarms when camera is viciously masking.
HDD full
System alarms when disk is full.
HDD error
System alarms when disk error occurs.
IP-CAM external
alarm (optional)
It refers to the on-off signal from the network camera. It
can activate the TX-64 local activation operation.
IP-CAM offline
alarm (optional)
System can generate an alarm when the network
camera and the TX-64 are disconnected.
Operation
Prompt
Check the box here, system can automatically pops up
an alarm icon on the Alarm button in the main interface
when there is an alarm.
Alarm Sound
(optional)
Play alarm
sound
System sends out alarm sound when an alarm occurs.
You can specify as you wish.
Sound path
Here you can specify alarm sound file.
5.12 Log out
Click log out button, system goes back to log in interface. See Figure 5-86. You need to input
user name and password to login again.
Figure 5-86
5.13 Uninstall Web Control
You can use web un-install tool ―uninstall web.bat‖ to un-install web control.
Note: before you un-installation, close all web pages, otherwise the un-installation
might result in error