User manual

126
5.8.5.3.2 Tour
The tour interface is shown as in Figure 5-69. Here you can set tour interval, split mode,
motion detect tour and alarm tour mode.
Figure 5-69
Refer to the following sheet for detailed information.
Parameter
Function
Enable tour
Check the box here to enable tour function.
Interval
Here is for you to adjust transparency. The value ranges
from 5 to 120s. The default setup is 5s.
Split
Here you can set window mode and channel group. System
can support 1/4-window according to device channel
amount.
Motion tour/
Alarm tour
Here you can set motion detect tour/alarm tour window
mode. System supports 1/4-window now.
5.8.5.4 Default
The default setup interface is shown as in Figure 5-70. Here you can select
Network/Event/Storage/Setting/Camera. Or you can check the All box to select all items.
Figure 5-70
5.8.5.5 Import/Export
The interface is shown as in Figure 5-71. This interface is for you to export or import the
configuration files.