User manual

122
Figure 5-61
5.8.5.2 Account
Note:
 For the character in the following user name or the user group name, system max
supports 6-digits. The space in the front or at the end of the string is null. The valid string
includes: character, number, and underline.
 The user amount default setup is 64 and the group amount default setup is 20. The
factory default setup includes two levels: user and admin. You can set the corresponding
group and then set the rights for the respective user in the specified groups.
 User management adopts group/user modes. The user name and the group name shall
be unique. One user shall be included in only one group. See Figure 5-76.
5.8.5.2.1 User
In this interface you can add/remove user and modify user name. See Figure 5-62.
Figure 5-62
Add user: It is to add a name to group and set the user rights. See Figure 5-63.
There are four default users: admin/888888 and hidden user ―default‖. Except user 666666,
other users have administrator right. Hidden user ―default‖ is for system interior use only and
can not be deleted. When there is no login user, hidden user ―default‖ automatically login.
You can set some rights such as monitor for this user so that you can view some channel
view without login. Here you can input the user name and password and then select one
group for current user. Note: the user rights shall not exceed the group right setup. For
convenient setup, make sure the general user has the lower rights setup than the admin.