User manual

121
The date and time interface is shown as in Figure 5-60 can be configured on this page.
Figure 5-60
Refer to the following sheet for detailed information.
Parameter
Function
Date format
Here you can select date format from the dropdown list.
Time Format
There are two options: 24-H and 12-H.
Date Separator
Select the date separator from the dropdown list.
Time zone
The time zone of the device.
System time
It is to set system time. It becomes valid after you set.
Sync PC
You can click this button to save the system time as your PC current
time.
DST
Here you can set day night save time begin time and end time. You
can set according to the date format or according to the week format.
NTP
You can check the box to enable NTP function.
NTP server
You can set the time server address.
Port
It is to set the time server port.
Interval
It is to set the sync periods between the device and the time server.
5.8.5.1.3 Holiday
Holiday setup interface is shown as in Figure 5-61.
Here you can click Add holidays box to add a new holiday and then click Save button to
save.