User manual

120
Figure 5-58
5.8.5 Setting
5.8.5.1 General
The general interface includes general, date/time and holiday setup.
5.8.5.1.1 General
The general interface is shown as in Figure 5-59.
Figure 5-59
Refer to the following sheet for detailed information.
Parameter
Function
Device Name
It is to set device name.
Device No.
It is device channel number.
Language
You can select the language from the dropdown list.
Note the device needs to reboot to get the modification
activated.
Video
Standard
This is to display video standard such as PAL.
HDD full
Here is for you to select working mode when hard disk is full.
There are two options: stop recording or overwrite. If current
working HDD is overwritten or the current HDD is full while the
next HDD is no empty, then system stops recording, If the
current HDD is full and then next HDD is not empty, then
system overwrites the previous files.
Pack duration
Here is for you to specify record duration. The value ranges
from 1 to 120 minutes. Default value is 60 minutes.
5.8.5.1.2 Date and time