User manual

119
Status
There are three statuses: schedule, manual and stop.
Schedule
System enables auto record function as you set in record schedule
setup (general, motion detect and alarm).
Manual
It has the highest priority.
Enable corresponding channel to record no matter what period
applied in the record setup.
Stop
Stop current channel record no matter what period applied in the
record setup.
Start all/ stop all
Check the corresponding All button; you can enable or disable all
channels record.
5.8.4.4 ADVANCED
5.8.4.4.1 Main Stream
The main stream interface is shown as in Figure 5-56. Here you can set corresponding HDD
group to save main stream.
Figure 5-56
5.8.4.4.2 Extra Stream
The extra stream interface is shown as in Figure 5-57. Here you can set corresponding HDD
group to save extra stream.
Figure 5-57
5.8.4.4.3 Image Storage
The Image Storage interface is shown as in Figure 5-58. Here you can set corresponding
HDD group to save image storage.