User manual

111
Parameter
Function
Buzzer
Check the box here to enable this function. The buzzer beeps when an
alarm occurs.
Alarm upload
System can upload the alarm signal to the centre (Including alarm
centre.
Send Email
If you enabled this function, System can send out an email to alert you
when an alarm occurs.
PTZ
Activation
Here you can set PTZ movement when alarm occurs. Such as go to
preset X. See Figure 5-37.
Tour
You need to click setup button to select tour channel. System begins
1-wiindow or multiple-window tour display among the channel(s) you
set to record when an alarm occurs. See Figure 5-38.
Snapshot
Click setup button to select snapshot channel. See Figure 5-39.
Video Matrix
(optional)
This function is for motion detect only. Check the box here to enable
video matrix function. Right now system supports one-channel tour
function. System takes ―first come and first serve‖ principle to deal with
the activated tour. System will process the new tour when a new alarm
occurs after previous alarm ended. Otherwise it restores the previous
output status before the alarm activation.
Figure 5-35