User manual

106
Parameter
Function
Health mail
enable
Check the box here to enable this function.
Update period
(interval)
This function allows the system to send out the test email to check the
connection is OK or not.
Check the box to enable this function and then set the corresponding
interval. The value ranges from 30 minutes to 1440 minutes.
System can send out the email regularly as you set here.
Email test
The system will automatically sent out a email once to test the
connection is OK or not .Before the email test, save the email setup
information.
5.8.2.8 FTP
The FTP interface is shown as in Figure 5-29. It is to set FTP IP, port and etc for remote
storage.
Figure 5-29
5.8.2.9 UPnP
It allows you to establish the mapping relationship between the LAN and the public network.
Here you can also add, modify or remove UPnP item. See Figure 5-30.
 In the Windows OS, From Start->Control Panel->Add or remove programs. Click the
―Add/Remove Windows Components‖ and then select the ―Network Services‖ from the
Windows Components Wizard.
 Click the Details button and then check the ―Internet Gateway Device Discovery and
Control client‖ and ―UPnP User Interface‖. Click OK to begin installation.
 Enable UPnP from the Web. If your UPnP is enabled in the Windows OS, the TX-64 can
auto detect it via the ―My Network Places‖