User manual

102
Refer to the following sheet for detailed information.
Parameter
Function
Max connection
It is the max Web connection for the same device. The value ranges
from 1 to 128. The default setup is 128.
TCP port
The default value is 37777. You can input the actual port number if
necessary.
UDP port
The default value is 37778. You can input the actual port number if
necessary.
HTTP port
The default value is 80. You can input the actual port number if
necessary.
HTTPS
The default value is 443. You can input the actual port number if
necessary.
RTSP port
The default value is 554.
5.8.2.3 HTTPS
In this interface, you can set to make sure the PC can successfully login via the HTTPS. It is
to guarantee communication data security. The reliable and stable technology can secure
the user information security and device safety. See Figure 5-24.
Note
 You need to implement server certificate again if you have changed device IP.
 You need to download root certificate if it is your first time to use HTTPS on
current PC.
Figure 5-24
5.8.2.4 PPPoE
The PPPoE interface is shown as in Figure 5-25. Input the PPPoE user name and password
you get from the IPS (internet service provider) and enable PPPoE function. Save current
setup and then reboot the device to get the setup activated. Device connects to the internet
via PPPoE after reboot. You can get the IP address in the WAN from the IP address column.
Note, you need to use previous IP address in the LAN to login the device. Go to the IP
address item to via the device current device information. You can access the
client-end via this new address.