User manual

adhesive backing of the metal plate in its place. Position the plate between the mobile
device and the interior of the case with the metal surface facing the case.
ONLY attach the adhesive side of the small plate to the interior of the mobile device rear
battery compartment cover if space and design permit. Plate will adhere to magnetic mount
through rear battery cover.
Charging function
Warnings
(2) Put the Smartphone with the
metal plate on the magnetic
holder. It will be supported by
strong magnetic power. You can
play the Smartphone with
hands-free.
First connect the 2-pin EU cable in the
2-pin port of the charger. Then insert the
connector into the power socket.
Then connect the USB charging cable of
your mobile device to the relevant USB
port of the charger. The connected
mobile device starts charging
automatically. The USB charging
maximum output is 5V 6.8A.
The magnetic plate will hold the mobile
device steadily on the charger surface
(see picture).