User manual

ManualsBrandsTECHNAXX ManualsPhoto/Video Batteries & PSUsUSB charging station TE10

Technaxx

User Manual

4-Port USB Magnetic Smart Charger TE10

The Declaration of Conformity is under the Internet link: www.technaxx.de/ (in bottom bar

“Konformitätserklärung”); Before using the device, read the user manual carefully.

Service phone No. for technical support: 01805 012643 (14 cent/minute from German

fixed-line and 42 cent/minute from mobile networks). Free Email: support@technaxx.de

Universal 4-port USB magnetic charger for smart devices with DC 5V input

Features

 Charging of 4 USB devices simultaneously

 Fast and efficient charging with 6.8A

 2-pin AC input cable for Europe

 Smart IC for auto-voltage detect

Over voltage and over current protection

 LED indicator

 35° angle of inclination of the magnetic holder

 Anti-static and anti-interference PCB design for stable charging

 Solid Neodymium magnet plate for secure hold

 High-quality fire and high temperature resistant material

 Soft rubberized finish and non-slip rubber pad

 Different possibilities to attach the metal plate to the mobile device

IMPORTANT: It is your responsibility to check safety regulations in your area to ensure the

lawful use of this device.

Technical Specifications

USB charger Output current max. 5V / 6.8A

Single output current charger 2x 1.0A and 2x 2.4A

Power supply (input power) AC 100V ~ 240V, 50/60Hz

Safety 5V 7A over voltage + over current protection

Material ABS, Anti-fire class A0

Weight / Dimensions 330g / (L) 7.6 x (W) 7.6 x (H) 7.6cm

Package Contents

4-port USB Magnet Smart Charger TE10, 2-pin AC

input cable for Europe, 1 metal plate, User Manual

Product overview

Summary of content (4 pages)

PAGE 1
Technaxx® User Manual 4-Port USB Magnetic Smart Charger TE10 The Declaration of Conformity is under the Internet link: www.technaxx.de/ (in bottom bar “Konformitätserklärung”); Before using the device, read the user manual carefully. Service phone No. for technical support: 01805 012643 (14 cent/minute from German fixed-line and 42 cent/minute from mobile networks). Free Email: support@technaxx.
PAGE 2
Magnetic plate USB output: 1.0A / 5V 2.4A / 5V On each side of the charger are two USB ports. Mounting the metal plate (1) Install the metal plate inside of phone case or battery cover, directly to your rugged case or directly to your device. First clean the surface of the mobile device, before sticking the magnetic holder on it.
PAGE 3
adhesive backing of the metal plate in its place. Position the plate between the mobile device and the interior of the case with the metal surface facing the case. ONLY attach the adhesive side of the small plate to the interior of the mobile device rear battery compartment cover if space and design permit. Plate will adhere to magnetic mount through rear battery cover. (2) Put the Smartphone with the metal plate on the magnetic holder. It will be supported by strong magnetic power.
PAGE 4
 Do not attempt to disassemble, drop, shake or dismantle the charger. It may result in short-circuit or even damage of the internal circuit boards or mechanics.  Do not expose the charger to an environment with high humidity or high temperature, extensive heat or direct sunlight, moist or underwater conditions.  Keep the surface of the charger clean, but do not use organic solvents.  Keep the charger away from little children. Security and Disposal Hints for Batteries: Hold children off batteries.