User manual

Attach the magnet to the Remove the metal plate
mobile device from the mobile device
Here some examples where to use this magnetic holder
eg. in a car, in the office, in the
kitchen, or wherever you have a
plain surface.
First clean the surface of the
mobile device, before sticking
the magnetic holder on it.
Warnings
 Do not attempt to disassemble the charger, it may result in short-circuit or even damage.
 Do not drop, shake or dismantle the charger, it may break internal circuit boards or
mechanics.
 Do not expose the charger to an environment with high humidity or high temperature,
extensive heat or direct sunlight, moist or underwater conditions.
 Keep the surface of the charger clean, but do not use organic solvents.
 Keep the charger away from little children.
Hints for Environment Protection: Packages materials are raw materials
and can be recycled. Do not disposal old devices or batteries into the
domestic waste. Cleaning: Protect the device from contamination and
pollution (use a clean drapery). Avoid using rough, coarse-grained
materials or solvents/aggressive cleaner. Wipe the cleaned device
accurately. Important Notice: Should battery fluid leak from a battery, wipe
the battery case with a soft cloth dry. Distributor: Technaxx Deutschland
GmbH & Co.KG, Kruppstr. 105, 60388 Frankfurt a.M., Germany
When once removed
the metal plate from
your mobile device,
it will not sit tight any
longer on another
device.