User manual

Mounting the metal plate – 4 different possibilities
(1) Attach the adhesive side of metal plate directly to
the back of the mobile device.
(2) Attach the adhesive side of metal plate directly to the back of the protection case of your
mobile device.
(3) (Large plate only) Attach the adhesive side of metal plate to the interior of the case,
between the mobile device and the inside of its case. The plate will adhere to magnetic
mount through the rear panel of the case.
NOTE: If choosing not to attach the metal
plate to the mobile device or case, leave
the adhesive backing of the metal plate in
its place. Position the plate between the
mobile device and the interior of the case
with the metal surface facing the case.