User manual

ManualsBrandsTECHNAXX ManualsCar Mobile Phone AccessoriesMobile Phone Car Holder TE09

Technaxx

User Manual

Magnet Multi Charger Kit TE09

The Declaration of Conformity is under the Internet link: www.technaxx.de/ (in bottom bar

“Konformitätserklärung”); Before using the device, read the user manual carefully.

Service phone No. for technical support: 01805 012643 (14 cent/minute from German

fixed-line and 42 cent/minute from mobile networks). Free Email: support@technaxx.de

Universal magnetic holder for mobile devices and dual USB Charger

Features

 Magnetic holder for 3.5”~7” mobile devices such as Smartphones and Tablet PCs

 Dual USB charger for the cigarette lighter socket

 Fast and efficient charging with 2.1A

 Short circuit protection

 Flexible gooseneck for different viewing angles

 Mounting with suction cup on plain surfaces

 Wide range of applications: office, kitchen, car, etc.

 Different possibilities to attach the metal plate to the mobile device

IMPORTANT: It is your responsibility to check traffic and safety regulations in your area, to

ensure the lawful use of this device.

Technical Specifications

USB car charger Output current max. 5V / 2.1A

Power supply (input power) DC 12V ~ 24V

Output current max. DC 5V / 2.1A

Weight / Dimensions charger 35g / (L) 9.0 x (W) 4.8 x (H) 4.0cm

Weight / Dimensions

magnetic holder with metal plate

43g / (L) 5.5 x (W) 4.0 x (H) 3.0cm

Weight / Dimensions gooseneck

+ suction cup + cap

112g / (L) 20.5 x Ø 6.5cm of suction cup

Weight / Dimensions metal plate 6g / (L) 5.0 x (W) 3.4 x (H) 0.1cm

Package Contents

Dual USB charger, Magnetic holder with flexible

gooseneck, 1 metal plate, User Manual

Charging function

(1) When you charge only in one USB port, the

maximum output current is 5V / 2.1A

(2) When you charge in both USB ports at the same

time, each USB port output current is then 5V / 1A

Summary of content (4 pages)

PAGE 1
Technaxx® User Manual Magnet Multi Charger Kit TE09 The Declaration of Conformity is under the Internet link: www.technaxx.de/ (in bottom bar “Konformitätserklärung”); Before using the device, read the user manual carefully. Service phone No. for technical support: 01805 012643 (14 cent/minute from German fixed-line and 42 cent/minute from mobile networks). Free Email: support@technaxx.de Universal magnetic holder for mobile devices and dual USB Charger Features  Magnetic holder for 3.
PAGE 2
Mounting the metal plate – 4 different possibilities (1) Attach the adhesive side of metal plate directly to the back of the mobile device. (2) Attach the adhesive side of metal plate directly to the back of the protection case of your mobile device. (3) (Large plate only) Attach the adhesive side of metal plate to the interior of the case, between the mobile device and the inside of its case. The plate will adhere to magnetic mount through the rear panel of the case.
PAGE 3
(4) (Small plate only) Similar to option (3), attach the adhesive side of the small plate to the interior of the mobile device rear battery compartment cover (ONLY if space and design permit). Plate will adhere to magnetic mount through rear battery cover.
PAGE 4
Attach the magnet to the mobile device Remove the metal plate from the mobile device When once removed the metal plate from your mobile device, it will not sit tight any longer on another device. Here some examples where to use this magnetic holder eg. in a car, in the office, in the kitchen, or wherever you have a plain surface. First clean the surface of the mobile device, before sticking the magnetic holder on it.