User manual

3.2 WIFI Setup via WEB Browser
You can connect the camera with router by wireless connection, as figure 3-5 shows. To
connect the camera via Smartphone directly got to chapter 6.2.
Figure 3-5
To set the WIFI connection the camera has to be connected via network cable to the router.
To connect the camera via WIFI you need to follow the steps under chapter 3.1 first. After
entering the Livestream mode (for Internet Explorer), click on the following icon to
enter settings. Under “Network Configuration” “WLAN/LAN Settings” press “Scan”. Then
choose the SSID (name) of your WIFI router. Enable Using Wireless Lan. Select the
authentication of your router and enter the password of your router. By clicking on
Submit/Set up the settings are saved and the camera is going to reboot. After rebooting is
successful you can unplug the network cable (wait about 3minutes). The camera is
connected via WIFI.
Figure 3-6
Notice: When the device is connected both WIFI and wired, it will firstly connect to the
wired network. If the camera enables DHCP to obtain IP address automatically, so the IP
address is not same in wired connection and WIFI connection.