User manual

3. Installation Guide
3.1 Wired connection to LAN
Power on the IP camera, connect IP camera to router by network cable, meanwhile,
connect computer to the same router, example of figure 3-1.
Figure 3-1
Insert CD to computer driver, double click
on the folder “Search Tools” in the CD and
then double click on “IPCameraSearch”.
After the software has started, click
“Refresh” (bottom left), select the wanted
device, double click on the device IP to
open browser. You also can enter the
device IP manual into the browser.
Example: http://IP of device:81. See figure 3-2.
Figure 3-2
It will pop up user login dialog, enter default user name (admin) and password will be
empty to login the camera as figure 3-3. Important: After first login change the password!
(Chapter 4.6.2 User settings)
Router / Modem
Network cable
IP Camera