User manual

(1) Open the APP, and click “Add device” to enter the adding device interface. (2) Click
“LAN search” to enter the interface which is searching the camera DeviceID in the LAN.
(Notice: The Smartphone and the camera should be connect to the same network) (3) If
DeviceID is found, you can directly click on it to add the camera into the list. (4) Enter the
camera password (5) Click “Done”, then the adding of the camera is finished.
Notice: The camera initial password is empty, when first using, no need to enter the
password and by clicking “Done” directly the setting will be ok. Important: After first login
change the password! (Chapter 6.4 User settings)
6.3 WIFI setting
To set or change the WIFI settings for your camera via your Smartphone follow the steps
shown in the figures below:
(1) Open the APP Security Advanced, click the gear shape icon on the right side to enter
the camera setting interface. (2) Click “WiFi setting” enter the WIFI setting interface. (3)
Click “WiFi Manager” to search for WIFI nearby.
Figure 6-6