User manual

Figure 6-1
(5) After camera configuration was successful, the APP can search out the camera
DeviceID and show it out. Click on the DeviceID in the list and enter the adding camera
interface. (if point (5) isn’t shown go back and search camera per LAN)
(6) Enter the camera password
(7) Click “Done”, then the adding of the camera is finished.
Notice: The camera initial password is empty, when first using, no need to enter the
password and by clicking “Done” directly the setting will be ok.
Important: After first login change the password! (Chapter 4.6.2 User settings)