User manual

Notice: For your own safety please customize the password before you make any further
settings. Go to User setting (figure 5-8) and set a customized user and password. For
different user class refer to chapter 4.6.2.
6. Mobile phone software (Security Advanced)
6.1 APP download
6.1.1 Android APP download
Search the software “Security Advanced” in the Google Play Store, and install
it to your Smartphone. Click on the APP icon “Security Advanced” to run it.
6.1.2 iOS APP download
Search the software “Security Advanced” in the Apple App Store on your iPhone, download
it and install it on your iPhone. Click on the APP icon “Security Advanced” to run it.
6.2 Add camera to the APP
There are 3 ways for adding camera:
1. One key to add
2. Scan the QR on the device
3. Search device in the LAN
6.2.1 One key to add
Connect the camera to the included power supply to startup the camera, wait for 90
seconds. Connect your Smartphone to the WIFI and open the Security Advanced APP.
Operate according to the following steps. See figure 6-1 and figure 6-2:
(1) Click “Add device” to enter the adding device interface.
(2) Click “One key to add” to enter the interface of one key to configure the WIFI.
(3) Enter the WIFI password which the Smartphone is connected with.
(4) First turn up or on the volume of the Smartphone, aim the speaker of the Smartphone at
the microphone of the camera. Press “Start Configuration”