User manual

4.3.2 Mail Service Setting
When alarming is detected, it can send email to your appointed email box, but you need to
set email service parameters correctly. Example of figure 4-8, click “Set up” to save these
parameters, and then you can click “Test” to check if the setting is successful. To enter the
information about SMTP server search your email provider on the internet and choose the
right settings to fill in figure 4-8. Our WEB Plug-IN will support you.
Figure 4-8
4.3.3 FTP Service Setting
When alarming, the device will snap local picture and send them to FTP server, but need to
set the FTP setting correctly. As figure 4-9, after the setting is finished, click “Test” to check
your settings are correct or not.
Figure 4-9
Notice: For using the FTP function, you need to apply a user with authority that you can
write and create submenu and some memory space. For FTP server just insert the IP
address.