User manual

After enabling Motion Detect Armed you can see the following options.
Motion Detect Sensibility Set the sensibility fro 1 to 10 (The smaller the value,
the more sensitivity.)
Alarm Audio Sensibility Choose to get alarmed if noise is detected (low,
medium, high or forbid).
Infrared alarm (not supported) Check the box to activate the PIR sensor
Alarm Input Armed (not supported) Check the box for external alarm
Trigger Level (not supported) Set up an external alarm input low or high
Alarm Preset Linkage Choose a preset here. When motion is detected the
camera will go to the selected preset position.
I/O Linkage on Alarm (not
supported)
Check the box for exporting control alarm signal
Output Level (not supported) Set up the output level to low or high
Send Alarm Notification by Mail Check the box to get informed by E-mail when
motion is detected. The E-mail is with a picture
attached.
Note: You have to set the E-mail settings first.
Upload Image of Alarm Check the box. When motion is detected and the
FTP server is set the picture will be uploaded to the
set FTP server.
Upload picture number Set the amount (1-10) of pictures that should be
saved on the FTP server.
Alarm recording Check the box. The camera will record video with
audio.
Scheduler Check the box to activate the Schedule.
Select all Check the box to select the complete schedule.