User manual

4.3 Alarm Settings
4.3.1 Alarm service setting
If user need to monitor a fixed area, when there is any motion, it will detect the motion and
trigger the alarm. In the motion detect sensibility, the smaller the value, the more sensitivity.
After enable the alarm, you can adopt several alarm mode in armed time.
• Link to the Preset when alarming: Need to set preset point of the camera;
• Send alarm info by email (email includes a picture); every alarm trigger one email;
• Upload the picture to the FTP server, user can also set the amount of the pictures.
Device only triggers alarm when it detects any motion in armed time. User can set
schedule time to be “all the time”, also assign the armed time. Before you set “Time
Schedule”, please go to Date and Time settings to set the correct time
Figure 4-7